BGA Reballing and Robotic Hot Solder Dip Solutions



 

AS9100 and ISO 9001 Certified

 

SolderQuik®
BGA Reballing Preform Alignment Fixtures

 

 

The SolderQuik® BGA Reballing Preform Alignment Fixture is used for aligning the SolderQuik® BGA Reballing Preform prior to reflow. They are available in a wide variety of dimensions including two flexible fixture that can be custom fit to a variety of components at the turn of a screw.   

The Table is sorted by fixture (component) size from smallest to largest.

 
Winslow
Part Number

Dimensions

43.038 4 x 4 mm
43.036 5 x 6 mm
43.031 5.76 x 7.87 mm
43.043 6 x 12 mm
43.067 6 x 6 mm
43.060 6 x 9 mm
43.066 6.5 x 7.91mm
43.032 6.96 x 7.28 mm
43.039 7 x 11 mm
43.029 7 x 7 mm
43.040 7 x 9 mm
43.063 8 x 10mm
43.045 8 x 14 mm
43.026 8 x 8 mm
43.041 9 x 11 mm
43.030 9 x 9 mm
43.070 10 x 15 mm
43.021 11 x 11 mm
43.065 11 x 13 mm
43.069 11 x 14.5 mm
43.023 12 x 12 mm
43.049 12 x 13 mm
43.019 13 x 13 mm
43.037 14 x 14 mm
43.046 14 x 22 mm
43.008 15 x 15 mm
43.024 16 x 16 mm
43.025 17 x 17 mm
43.064 17.78 x 17.78 mm
43.028 18 x 18 mm
43.044 19 x 19 mm
43.012 19.5 x 19.5 mm
43.020 20 x 20 mm
43.001 21 x 21 mm
43.035 21 x 25 mm
43.047 22 x 22 mm
43.048 22 x 29 mm
43.002 23 x 23 mm
43.009 25 x 25 mm
43.016 26.9 x 26.9 mm
43.003 27 x 27 mm
43.010 29 x 29 mm
43.034 30 x 30 mm
43.033 31 x 35 mm
43.004 31x 31 mm
43.013 32.5 x 32.5 mm
43.018 33 x 33 mm
43.061 34 x 34 mm
43.005 35 x 35 mm
43.014 37.5 x 37.5 mm
43.006 40 x 40 mm
43.015 42.5 x 42.5 mm
43.007 42.6 x 42.6 mm
43.017 42.8 x 42.8 mm
43.011 45 x 45 mm
43.027 50.8 x 50.8 mm
43.100 Flexible, >25mm
43.101 Flexible, <25mm